Material Testing Lab Instruments

Material Testing Equipments

Product Details:
  • Capacity (Kilogram): 600 kg
  • Type of Testing Machines: Compression Testing Machine
  • Type: Testing

Brief Introduction:
TECH-600C computer controlled servo hydraulic universal testing machine is mainly used to execute the tension, compression, bending, flexural etc. Test for metal materials. Attached with simple accessories and devices, it can be used to test wood, concrete, cement, rubber, and so on. It is very suitable for making test to different metal or nonmetal materials under high toughness and hardness against extreme big loading force.

Vikers Hardness Tester

Product Details:
  • Weight: 73kg
  • Power Supply: 220V AC, 50 Hz, 1-Phase
  • Depth of Throat: 133 mm

Technosys offer Vickers Hardness Tester, which is used in carrying out tests related to scratch resistance under specified loads. With involved tests conducted on go/no go basis, the testing is performed at single specified load on needle as well as on the basis of process comprising increasing loads for determining minimum load at which coating penetration is achieved.

Test Loads5,10,20,30,50kg.
Magnification of optical projection70X
Max. Test Height (mm.)200
Scale least count(mm.)0.001
Dimensions of Machine (mm.)L585xW290xH860

Brinell Hardness Testing Machine

Product Details:
  • Machine Height: 860 Mm
  • Size of Base: 255 x 495 mm
  • Depth of Throat: 150 mm

Technosys Offer Brinell Hardness Tester of metals and alloys. The load is applied by manually and the indentation is read with the help of a Brinell Microscope. We well renowned portable hardness tester manufacturer. Team of experts and cutting edge technology are our strengths through which it is possible to get a excellent hardness testers that are wonderfully serving various sectors. Known for quality and we never compromise on that.

Rockwell Hardness Testing Machine

Product Details:
  • Machine Height: 635 mm
  • Net Weight: 275 kg
  • Size Of Base: 171x423 mm

Technosys Systems Hardness Testers Models TECH RAS, TECH RASM, TECH RAB-1, TECH RAB-250, TECH TWIN are manually operated. All these models are suitable for testing hardness of metals & alloys of all kinds hard or soft, whether flat, round or irregular in shape. These testers are simple in design & easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for Engg. Colleges, laboratories, toolroom, inspection departments, factories etc.

LoadsKgf.60,100,60, 100,60,100, 150,60, 100,150,15, 30,45, (Rockwell, 250.187.5, 250Superficial) 60,100,150 (Rockwell)
Initial LoadKgf.101010103(Rockwell Superficial) & 10 (Rockwell)
Max. Test Heightmm.230230230295295
Depth of Throatmm.133133133150150
Max. Depth of elevatingmm.240240240310310

Rockwell & Rockwell superficial tests consists of forcing an indentor (Diamond or Ball) into the surface of a test piece in two steps i.e. first with preliminary test force and thereafter with additional test force & the measuring depth of indentation after removal of additional test force (Remaining preliminary test force active) for measurement or hardness value. OPERATION : For Rockwell & Rockwell Superficial


OPERATION :For Rockwell & Rockwell Superficial Test :

In case of 'RASN' series machines for Rockwell or Rockwell Superficial Test a preliminary test force in first applied & then indicator is automatically set for zero. Quickly thereafter & additional test force is applied without removing the preliminary test force. When the penetration is stabilized, the additional test force is removed & the hardness number is shown directly on the indicator.The operation is exactly same as above. However, the diameter of impression is measured out side of machine by rockwell microscope. rockwell Hardness number is found out by referring corresponding hardness tables showing hardness number against di. of indentation for specified ball diameter and test force.

Vickers Cum Brinell Hardness Tester

Product Details:
  • Height: 250 mm
  • Machine Frame: 150 mm
  • Weight Approx: 180 Kg

Technosys one of the prominent manufacturer and supplier of quality wide range of Vickers Cum Brinell Hardness Tester, we are engaged in providing quality products to our valuable clients as per industry standard, our products are best in industry and know for their premium quality and high performance. These testers can be availed at availed at market leading prices.


  • Dimensions (L X W X H mm) Approx.: 650 X 320 X 990

Impact Testing Machine

Product Details:
  • Net Weight: 375 Kg.
  • Overall Size: 1.32m x 0.45 m x 1.05 m (H)
  • Maximum Capacity: 300 J/170 J

The Pendulum is mounted on antifriction bearings. It has two starting positions, the upper one for Charpy & the lower one for izod testing. On release, the pendulum swings down to brake the specimen and the energy absorbed in doing so is measured as the difference between the height of drop before rupture and the height of rise after rupture of the test specimen and is read from the maximum pointer position on the dial scale. (It is read on Digital Panel in case of digital models)Controls Pendulum:The Pendulum supports in the starting positions is by a self resetting latch. The release mechanism is operated by lever. The pendulum release latch is operated only when this lever is operatedStrikers & Supports There are two strikers and one combined support available for lifting in to the pendulum and on to the base of the machine for Izod., Charpy test, Changing from one striker to another is achieved simply by fixing the new striker into it's position.

 Charpy Test:

The Charpy test piece rests on alloy support anvils, fitted on the base of the machine rigidly held in position by Allen screws. End stopper is provided for quickly and accurately locating the test piece centrally between the supports.


Izod Test:

The Izod test is clamped vertically in Izod support fitted on the base of the machine. The support is provided with a machined vertical groove to suit the test piece size. The front clamp piece and the Allen screw enable clamping of the test piece in correct height with the help of Izod setting gauge supplied.


  • Caliper gauge for checking V notch for Izod & Charpy.
  • Templates for checking 10 x 10 mm cross section of Izod / Charpy test specimen
  • Depth notch gauge including V & U notch gauges for checking depth blow V/U notch, angle and radius.
  • Self centering tong for quick and accurate setting of Charpy test specimen.

Torsion Testing Machine

Product Details:
  • Torque Range: 20,50, 100 (NM)
  • Grips For Square Bar: 3-6 6-9 9- 12 mm.
  • Use: Testing

  • Suitable for Torsion and Twist test on various metal rods and flats.
  • Torque Measurement by pendulum dynamometer system.
  • Auto torque selector to adjust torque ranges.
  • Geared motor to apply torque to specimen through gearbox.
  • Autographic recorder for relation between torque and angle of twist.


Technical Specification

Tech.CS - TT 10Tech.CS - TT 20Tech.CS - TT 50
Max. Torque Capacity (Nm)100200500
Nos. of Division on dial500500500
Test speed and direction1.5 RPM Reverse1.5 RPM Reverse1.5 RPM Reverse
Clearance between grips (mm)0-4000-4500-500

Fatigue Hardness Testing Machine

Product Details:
  • Main Supply: 3ph 440v 50hz
  • Weight: 120 kg
  • Overall Size: 1000 L X 500 W X 600 H (mm)

This machine is used to test the fatigue strength of materials and to draw S-N diagram by research institute, laboratories, material manufacturers and various industries. This is rotating beam type machine in which load is applied in reversed bending fashion. The standard 8 mm dia specimen is held in special holders at its ends and located such that it experiences a uniform bending moment. The specimen is rotated at 4200 rpm by a motor. A complete cycle of reversed stresses in all fibres of the specimen is produced during each revolution.The bending moment is applied with the lever system and can be easily changed by moving a weight over the lever. Total number of revolution at which the specimen fails are recorded by a mechanical counter. An interlocking system puts off the motor at specimen failure. Machine meets requirement of IS 5075-1969.
  • 6 digit electronic counter instead of mechanical counter can be supplied at additional price.
  • Machine with maximum bending moment upto 400 Kg. cm can be offered on request.
Max. bending moment (Kg. cm)200
Bending moment adjustable ( - 200
Ranges : 1 - II - Kg.cm25- 125 125-200
Gripping dia of specimen (mm)12
Testing dia of specimen (mm)8
Rotating speed in RPM4200
Accuracy of applied bending moment±1%
Mechanical Counter: No. of digits Multiplying factor6 3
Power required in HP0.5


  • Table model, no need of foundation.
  • Simple lever system for changing load.
  • Calibration in Nm available on request.
  • Light weight, Simple design, Compact Size.

Spring Testing Machine

Product Details:
  • Capacities: 100 Kg up to 100
  • Type: Spring
  • Use: Industrial

Backed by a team of dedicated and skilled professionals, we are able to offer a large variety of Spring Testing Machine. These are used under the compression and tension loads. Its induction motor rotates the specimen and cut off switch stops the functioning of machine at the time of failure.

Leaf Spring Testing Machines

Product Details:
  • Maximum Capacity: 100 kN to 500 kN
  • Accuracy: +- 1 %
  • Type: Leaf Spring

The machine is used to test wide range of Leaf / Laminated Springs for load rate as per IS:1135-1984.
Measuring ranges available with auto load selection facility.
Large size table for wide range of springs with motorized rapid adjustment of test height.
Standard autographic recorder.
Over load & Over travel safety provisions.
Facility of Compression, Shear, Brinell & Bending test with extra accessories.
Load stabilizer (Optional) is an extra attachment used to maintain a desired load constant at specific deflection
enabling measuring it easily & accurately.
We can also supply machines for Helical compression springs & Disc springs.
Analogue, Digital & Computerized versions are available.

Heat Transfer Lab Equipments

Product Details:
  • Material: Steel
  • Type: Heat Resistant
  • Use: Laboratory, LAB

We are manufacturing and supplying a wide range of Heat Transfer instruments for numerous Private units, Research Institutions, Engineering colleges, Technical institutes, R & D labs, WALMI, ICAR and other Govt. Organizations

Product Specification Heat Transfer Lab.
Heat Transfer Through Composite wall
Heat Transfer Through Lagged Pipe
Heat Pipe Demonstrator
HT-104Thermal Conductivity Of Insulating Powder
HT-105Thermal Conductivity Of Metal Rod
HT-106Thermal Conductivity Of Insulating Slab
HT-107Thermal Conductivity Of Liquids
HT-108Heat Transfer From A Pin-Fin
HT-109Heat Transfer In Forced Convection
HT-110Heat Transfer In Natural Convection
HT-111Emissivity Measurement Apparatus
HT-112Stefan Boltzmnn's Apparatus
HT-113Dropwise And Filmwise Condensation Apparatus
HT-114Parallel Flow/counter Flow Heat Exchanger
HT-115Shell And Tube Heat Exchanger
HT-116Finned Tube Heat Exchanger
HT-117Vertical And Horizontal Condenser
HT-118Heat Transfer In Agitated Vessel
HT-119Unsteady State Heat Transfer Unit
HT-120Open Pan Evaporator
HT-121Single Effect Evaporator
HT-122Double Effect Evaporator
HT-123Calandria Evaporator
HT-124Plate Type Heat Exchanger
HT-125Fluidized Bed Heat Transfer Unit
HT-131Heat Exchanger Teaching Setup
HT-132Heat Transfer Teaching Setup

Metal Testing Equipments

Product Details:
  • Material: Metal
  • Software: Mat Bench Software
  • Machine: Torsion Testing Machine

Metals play an important role in almost all industries. Uncovering the strength of metals, its microstructure, plays vital role in their application and uses. There are some crucial uses of metals, where, even tiniest impurity can create havoc in their application.Technosys Systems manufacture a whole lot of products for metal testing. From Destructive to Non Destructive Testing and from manual to servo based machines, we have machines to test each and every aspect of Metals and Metallurgical products.

Metal Testing Testing Product:
  • Hydraulic UTM(Closed Head Design) Mechanical Dial Type
  • Hydraulic UTM (Closed Head Design) Electronic Microprocessor Based
  • Hydraulic Computerized (Close Head Design)
  • Hydraulic Servo Control (Closed Head Design)
  • Accessories for UTM
  • EDW (Ball Screw Driven Electro-Mechanical Series)
  • Tensile Testing Machine
  • Test Accessories for Computer Controlled Electro-Mechanical Testing Machine
  • Micro Computer Controlled Torsion Testing Machine (TW Series)
  • Impact Tester
  • Charpy Impact Tester Machine (Micro Computer Controlled)
  • Projection Screen & Low Temperature Chamber
  • Rockwell Hardness Tester
  • Automatic Rockwell Hardness Tester
  • Brinell Hardness Tester (Hydraulic Mechanical Type)
  • Brinell Hardness Tester (Electronic Micro-Processor Based)
  • Fatigue Testing Machine
  • Portable Hardness Tester
Looking for Material Testing Lab Instruments ?
Share Us:
© Technosys Systems
Desktop Site Back to top