NDT Testing Instruments

Digital Rockwell Hardness Tester

Product Details:
  • Display: Matrix Backlight LCD
  • Operation: Menu Selectable, Membrane Keypad
  • Total Load: 588.4N/60kgf, 980.7N/100kgf, 1471N/150kgf

Features:
  • Horizontal protrudent nose design, testing on surfaces difficult to reach
  • Testing internal surface of ring parts whose diameter is not less than 23mm(0.900)
  • Testing external surface of round bars whose diameter is not less than 3mm (0.120)
  • Automatic test process
  • High definition backlight LCD
  • Simple and easy selectable operation menu
  • RS-232/USB data output
  • TH300: Rockwell hardness tester
  • TH301: Rockwell hardness tester with auto-switch of test force.
  • TH310: Rockwell superficial hardness tester.
  • TH320: Rockwell & Rockwell superficial hardness tester
Technical Specification:

Model

TH300

TH301

TH310

TH320

Hardness scales

Rockwell A, B, C,D,E,F,
G, H, K ,L, M ,P, R, S, V

Rockwell A, B , C, D,E, F, G, H,K, L, M, P, R, S, V

Rockwell superficial
15/30/45N,T, W, X, Y

Rockwell A,B,C,D,E,F,G,H,K,L,M,P,R,S,V
Rockwell superficial15/30/45N,T,W,X,Y

Resolution

0.1Rockwell unit

Pre-load

98.07N/10kgf

29.42N/3kgf

98.07N/10kgf, 29.42N/3kgf

Language

English, French, Germany

English

Test process

Automatic

Load duration

2-50 seconds, can be set,
dynamic displayed and stored

2-50 seconds, Can be set,
dynamic displayed and stored

2-50 seconds, Can be set, dynamic displayed and stored

2-50 seconds, Can be set, dynamic displayed and stored

 





Data output

RS232

RS232, USB

RS232

RS232

standard

ISO6508.2 , ASTM E-18

 




Surface Roughness & Form Tester

Product Details:
  • Batteries: Rechargeable Batteries
  • Type: AMP Tester
  • Display: LCD Display

Product Introduction:

Portable Surface Roughness Tester - TIME3100 is a pocket-sized economically priced instrument for measuring surface texture conforming to traceable standards. It can be used on the shop floor in any position, horizontal, vertical or anywhere in between.The large LCD display shows either roughness parameter Ra or Rz at the touch of a button, combined with the selected cut-off length. External calibration of roughness values is possible by means of a special CAL button, which makes adjustment of this instrument very easy. A beep signal informs the user of each individual measurement status when ready.The easy to use TIME3100 operates on various surfaces, not only flat but also outer cylinder, outer cone, grooves, and recesses greater than 80 X 30mm. The areas of application are wide spread. This unit is most suitable for inspection departments, quality control, on the shop floor during machining, assembly and on-site.TIME3100 determines both roughness parameters Ra and Rz within a wide measuring range (See specifications below). The piezo-electric pick-up stylus with diamond tip assures a very reliable measurement within tolerances in conformance with ISO Class 3. Ra parameter is in conformance to ISO while Rz conforms to DIN standards


Features:

  • Pocket-size & economically price
  • Large measuring range suitable for most materials
  • Measures flat, outer cylinder and sloping surface
  • Both Ra and Rz parameters in one instrument
  • Features external calibration at keyboard
  • Standard conform to ISO and DIN
  • Rechargeable batteries, work while charging

Surface Roughness Tester

Product Details:
  • Material: Non-Metal
  • Use: Industry
  • Type: Roughness

Product Introduction:

  • Multi-parameter measurin
  • High accuracy inductance pickup
  • Filtering methods of 2RC, GAUSS
  • Compatible with four standards of ISO1997, ANSI and JIS2001
  • TFT LCD displays all parameters and graphs
  • Can be connected to TIME TA230 printer to print all parameters and graphs
  • Built-in standard RS232 interface and USB interface
  • Language: Simplified Chinese/English
  • Shut off automatically or manually
  • External pickup design, small driver and simple to use.


Industry Application There is a report analyzes every business who uses the tester, and enumerate the customers especial Time’s customers in order to comprehend the using of the testers in every industries more deeply.

  • Firstly, the mechanical manufacturing industry, mostly the manufacture of metal. The primary function of roughness tester is testing the surface roughness of processing parts especially the pot-ball roughness tester is adept to testing the hard surface. For example the automobile parts manufacturing, mechanical parts manufacturing, etc. the roughness tester is essential in every manufacturing industry engaged in quality of parts surface.
  • Secondly, the industry of manufacture of non-metal. As the development of science and technology, more and more new materials are used in manufacturing techniques, for example, pottery, plastic, polyethylene, etc. now some bearings are made in special pottery, and some pump valves are made in polyethylene. These materials all have firm character, and some of them can be made into parts instead of metal. Their surface roughness also needs testing in manufacture.
  • As the technology and function of the roughness tester being perfected, besides the mechanical processing, surface roughness testing is also used in electric power, communication and electron, so much as stationery, dishware and the surface of one’s teeth.

27 MG Ultrasonic Thickness Gage

Product Details:
  • Weight: 340 gm
  • Surfaces: Hot Surfaces
  • Thickness: 20 Measurements Per Second

The Olympus 27MG is an affordable ultrasonic thickness gage designed to make accurate, measurements from one side on internally corroded or eroded metal pipes, tanks, and other equipment. It weighs only 12 oz. (340 g) and is ergonomically designed for easy, one-hand operation. Despite its compact size, the 27MG has many innovative measurement features utilizing the same technologies that are available on our more advanced thickness gages. The durable, rugged 27MG is battery-operated and features a large, backlit LCD with easy-to-read numerals, and an intuitive color-coded keypad with direct access to many key features.Standard features include Automatic Probe Recognition to ensure optimal transducer performance, Auto Zero compensation to enhance the accuracy of measurements on hot surfaces, Gain Adjust to improve measurements on sound-attenuating materials such as cast metals, Differential mode, Hi-Low Alarm settings, and a Min./Max. mode that captures the minimum or maximum thickness at 20 measurements per second.The 27MG is designed for inspectors and maintenance engineers that need to monitor the wall thickness in metal pipes, tanks, beams, and structural supports that are susceptible to corrosion on the inside surface. An ultrasonic thickness gage provides a quick, cost-effective solution by transmitting sound into the material from the outside, making it unnecessary to damage the part.

Key features:

  • Automatic Probe Recognition, to enhance transducer performance;
  • Auto Zero compensation, to enhance the accuracy of measurements on hot surfaces;
  • Gain Adjust to improve measurements on sound-attenuating materials;
  • Differential mode;
  • D7910 dual element transducer;
  • High-Low Alarm settings; and

45mg Ultrasonic Thickness Gauge

Product Details:
  • Designed: IP67
  • Thickness: 0.18 mm
  • Port Type: USB Communication

The 45MG is an advanced ultrasonic thickness gage packed with standard measurement features and software options. This unique instrument is compatible with the complete range of Olympus dual element and single element thickness gage transducers, making this innovative instrument an all-in-one solution for virtually every thickness gage application.

Key features

· It is compatible with dual element transducers for

· measuring thickness on internally corroded metals

· Password instrument lock

· Two Alarm modes

· Time-based B-scan

· Differential mode

· Designed for IP67

· Optional protective rubber boot with gage stand

· Wide operating temperature range

· USB communication port

· Internal and removable MicroSD memory card storage

· Colortransflective QVGA display with indoor and outdoor color settings is used for providing high readability

· Simple keypad for right hand/left hand operation

· Password protected instrument lock

· Easy operator interface is used for accessing most of the functions

38DL PLUS Ultrasonic Thickness Gage

Product Details:
  • Thickness: 0.08 mm to 635 mm
  • Resolution: 0.01 mm or 0.001
  • Element Transducers: 2.25 MHz to 30 MHz

The 38DL PLUS is an innovative instrument that signals a new era in ultrasonic thickness gaging. Ideally suited for almost every ultrasonic thickness application, this handheld thickness gage is fully compatible with a full line of dual and single element transducers. The versatile 38DL PLUS can be used in applications ranging from wall thinning measurements of internally corroded pipes with dual element probes to very precise thickness measurements of thin or multilayer materials with single element transducers. The 38DL PLUS comes standard with many powerful but easy-to-use measurement features and a host of application-specific software options. Its sealed case is designed to meet IP67 requirements to withstand the rigors of very wet or dusty environments. The colortransflective VGA display provides superior readability from bright sunlight to complete darkness. It features a simple, ergonomic keypad that can be operated with the left or right hand for easy access to all functions.

Key features:

  • Corrosion thickness gaging with dual element transducers
  • THRU-COAT® and Echo-to-Echo measurements on painted and coated surfaces
  • Internal Oxide/Scale software option
  • High Resolution software option of 0.001 mm or 0.0001 in. with single
  • Multilayer software option for measurements of up to four layers simultaneously
  • High Penetration software option for attenuating materials such as fiberglass, rubber and thick casting
  • Thickness, Velocity, and time-of-flight measurements
  • Differential mode and Reduction Rate mode
  • Time-based B-scan mode; 10,000 reviewable readings per scan
  • Olympus High Dynamic Gain technology with digital filters
  • V-Path Builder for custom V-path compensation
  • Designed for EN15317

EPOCH 650 Ultrasonic Flaw Detector

Product Details:
  • Rapid Scanning: 2 kHz PRF
  • Battery Life: 15 Hours
  • Range Receiver: Digital High Dynamic

The large, full VGA transflective display combined with our patented digital high dynamic range receiver provides a stable, striking A-scan representation in any lighting condition. The EPOCH 650 is designed to meet the requirements of EN126681 and allows a full range of standard and optional flaw detection features. Multiple onboard reporting tools and a comprehensive data filing system enable you to easily collect and report high quality inspection data.The rugged, ergonomic design allows use in nearly any inspection environment, while the flexible PerfectSquare™ pulser and highest number of digital filters in its class can tackle nearly any application

Key Features:
  • Designed to meet the requirements of EN12668-1
  • PerfectSquareTMtunable square wave pulser
  • Full screen A-scan mode
  • Thirty digital filters for enhanced signal-to-noise ratio
  • Knob or navigation pad adjustment configurations
  • Large, full VGA sunlight readable display
  • Standard dynamic DAC/TCG and onboard DGS/AVG
  • Multiple on-board report formats
  • MicroSD memory card for data transfers
  • Optional Corrosion Module software with Encoded B-scan
  • USB On-The-Go (OTG) for PC communication
  • Alarm and VGA outputs
  • Optional analog output

EPOCH 1000 Ultrasonic Flaw Detector

Product Details:
  • Display Resolution: 640x480 VGA
  • Filter Selections: 37 Digital Receiver
  • Speed Scanning: 6 kHz Pulse

The EPOCH 1000 Series Digital Ultrasonic Flaw Detectors combines the highest level of performance for conventional portable flaw detection with the power of phased array imaging. The EPOCH 1000, 1000 iR and 1000 i feature a new horizontal case style with full VGA display, knob and navigation arrows for parameter adjustment, and full EN126681 compliance. The advanced conventional ultrasonic functionality of the EPOCH 1000 series is augmented in the EPOCH 1000 i with phased array imaging capabilities.Rugged. Portable. Meets the Demands of the Toughest Inspection Environments The EPOCH® 1000 Series is designed to meet the IP66 environmental rating. Tested for shock, vibration, explosive atmosphere, and wide temperature range, these instruments can withstand operation in harsh inspection conditions. Some of the EPOCH 1000 Series' other key physical Features Include:

  • Rugged rubber handle for easy transport.
  • Durable instrument-mounted D-rings for chest harness use.
  • Front and rear stands for table-top or steep inclined viewing.
  • USB Client and Host ports for PC communication, direct printing and communication with peripheral devices.
  • VGA output for presentations, training, and remote instrument monitoring.
  • Programmable analog outputs, alarm outputs, and RS-232 communication.

 

Key features:

  • Available with Phased Array Imaging Package
  • EN12668-1 compliant
  • Encoded or time-based C-scan option
  • Automatic phased array probe recognition
  • Intuitive wedge delay and sensitivity calibration for all focal laws
  • Programmable analog/alarm outputs
  • Designed for IP66 environmental rating
  • Horizontal design with navigation panel and knob parameter adjustment
  • Digital high dynamic range receiver
  • Full VGA sunlight readable display
  • ClearWave™ visual enhancement package for conventional A-scan interpretation
  • SureView™ visualization feature
  • Reference and measurement cursors
  • Standard dynamic DAC/TVG
  • Standard onboard DGS/AVG

Omni Scan SX

Product Details:
  • Display: 21.3 cm
  • Screen Mode: Full Screen Mode
  • Type: Scan SX

Olympus is proud to introduce the OmniScan® SX, a flaw detector that benefits from more than 20 years of phased array experience and shares the OmniScan DNA. For improved ease of use, the OmniScan SX features a new streamlined software interface displayed on an 8.4 in. (21.3 cm) touch screen. A single-group and non-The OmniScan SX comes in two models: the SX PA and SX UT. The SX PA is a 16:64PR phased array unit, which, like the UT-only SX UT, is equipped with a conventional UT channel for pulse-echo, pitch-catch or TOFD inspection. Compared to the OmniScan MX2, the SX is 33% lighter and 50% smaller, offering an unprecedented level of portability for an OmniScan.The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, essentially converting many menu functions into easy touch-screen operations. The intuitive interface provides smooth menu selection, zooming, gate adjustments, cursor movements, and text and value input. These, along with other premium integrated features, including easy-to-follow setup and calibration Wizards, a rapid refresh rate for both the S-scan and A-scan displays, and a fast pulse repetition frequency (PRF), make the OmniScan SX a highly efficient inspection tool.The OmniScan SX is fully compatible with the extensive portfolio of Olympus scanners, probes and accessories, as well as with its dedicated software companions, NDT SetupBuilder and OmniPC. Combined, the complete family of software and hardware contributes to a streamlined and efficient inspection workflow, from design and setup to acquisition and analysis.modular instrument, the OmniScan SX is easy to operate and cost-effective for less demanding applications.The OmniScan SX touch screen offers a full-screen mode option that maximizes visibility, essentially converting many menu functions into easy touch-screen operations. The intuitive interface provides smooth menu selection, zooming, gate adjustments, cursor movements, and text and value input.The OmniScan SX is fully compatible with the extensive portfolio of Olympus scanners, probes and accessories, as well as with its dedicated software companions, NDT SetupBuilder and OmniPC. Combined, the complete family of software and hardware contributes to a streamlined and efficient inspection workflow, from design and setup to acquisition and analysis.

Key features:
  • Single-group and non-modular
  • 33% lighter and 50% smaller than MX2 model
  • Easy-to-follow setup and calibration wizards
  • Rapid refresh rate for the S-scan and A-scan displays
  • Fully compatible with the extensive portfolio of Olympus scanners, probes, accessories and software

Omni Scan MX2

Product Details:
  • Screen: Bright, Large Touch Screen
  • Software: New OmniPC Analysis Software
  • Type: Omni Scan

The result of over 10 years of proven leadership in modular NDT test platforms, the OmniScan MX has been the most successful portable and modular phased array test instrument produced by Olympus to date, with thousands of units in use throughout the world.

Olympus now offers a new PA module with TOFD, a new UT module, as well as new software programs (NDT SetupBuilder and new OmniPC version) that expand the capabilities of the successful OmniScan MX2 platform and improve the workflow efficiency of nondestructive testing inspections.

Key features
  • Bright, Large Touch Screen
  • New Phased Array and TOFD Modules
  • New NDT SetupBuilder Design Software
  • New OmniPC Analysis Software

Tomo Scan Focus LT

Product Details:
  • Material: Aluminum
  • Locking Devices: Each Axis To Be Locked
  • Module: 3.27 mm

The FOCUS LT™ is a high performance phased array acquisition unit designed for seamless integration with fully automated inspection systems.Equipped with powerful TomoView™ software, up to three FOCUS LT units can be driven simultaneously, providing increased productivity and reduced inspection time.

Key features:
  • Well suited for phased array UT, conventional UT, and eddy current inspection techniques using one probe
  • Compatible with the OmniScan, the TomoScan FOCUS LT (with optional adapter), and other instruments using the appropriate encoder cable
  • Two axes with waterproof encoders for position-encoded X-Y scans
  • Axis positioning with minimal backlash
  • Both modules are mounted on bearings for precise and smooth displacement
  • Two pivot-equipped mounting pods enable surface following
  • The probe holder is mounted on a bearing-arm system that can be spring loaded if needed
  • Sliding Y-axis provides greater scan flexibility and improved portability

Portable Eddy Current Flaw Detectors OmniScan MX ECA/ECT

Product Details:
  • Display: 213 mm
  • Function: USB Mouse
  • Type: Portable

Portable Eddy Current Flaw Detectors OmniScan MX ECA/ECT OmniScan MX enables you to see defects and details under any light conditions. Navigate your way through the instrument’s simple and intuitive interface using the scroll knob and keys, or by connecting a USB mouse to facilitate the inspection analysis.

NORTEC 600 Portable Eddy Current Flaw Detectors

Product Details:
  • Display Size: 5.7 Inch
  • Long Battery Life: Up to 10 hours
  • frequency capacity: 10 Hz to 12 MHz

Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator.Olympus converges its latest advancements in high-performance digital circuitry and eddy current flaw detection into one compact and durable portable unit—the new NORTEC® 600. With its crisp and vivid 5.7 inch VGA display and true full-screen mode, the NORTEC 600 is capable of producing highly visible and contrasting eddy current signals in any lighting condition.The redesigned interface of the NORTEC 600 borrows the intuitive, knob-operated navigation of its NORTEC predecessors and combines it with the simple menu structure and highly efficient direct-access keys of other popular Olympus instruments. Available in four versatile models, the NORTEC 600 offers a wide range of innovative functionalities, including an Application Selection menu, an all-in-one display, real-time readings, and signal calibration in Freeze mode, ensuring that inspections are quick and easy for any level of operator.

Key Features

  • Designed to meet the requirements of IP66.
  • EN-15548 compliant.
  • Full-screen option in any display mode.
  • Improved filters for rotary scanner mode.
  • Intuitive interface with Application Selection presets.
  • All-settings configuration page.
  • Automatic internal balancing (BNC connector).
  • Up to two real-time readings.
  • True automatic mixing.
  • Storage capacity of up to 500 files (program and data).
  • On-board file preview.

Multi Scan MS5800 for Tube Inspection

Product Details:
  • Type: Scan
  • Use: Laboratory
  • Surface: Magnetic Flux

Multi-technology system that offers eddy current, magnetic flux leakage, remote field and IRIS ultrasound technologies.

Rotating Bolthole Scanners

Product Details:
  • Type: Rotating Bolthole
  • Speed Range: 600-1000 rpm
  • Frequncy Range: 10-20 Mhz

Rotating Bolthole Scanners line of high performance eddy current scanners is available for use with Nortec Eddy Current Flaw Detectors. With a wide range of features consisting multiple connector types, and multiple probe types, our scanners offer a full range of application solutions. Some of the more common applications are: airframe hole inspection with or without fasteners, wheel bolt hole inspections, surface inspections, post production testing for cracks, tube plug testing, and low frequency inspections through multiple aircraft skin layers.

Eddy Current Probes

Product Details:
  • Usage: Industrial, Laboratory
  • Designs: Specific Inspection
  • Type: Eddy Current

Eddy Current Probes current probes consist of the acquired brands of Nortec and NDT Engineering. We offer more than 10,000 standard and custom designed eddy current probes, standard references, and accessories. This section features many of the standard design probes that are available in a wide range of diameters, frequencies, and connector styles.Olympus also offers custom probe designs to meet specific inspection requirements. Eddy current probes may be designed to match the contours of a part or shaped to fit into a fixture for fast and accurate inspections.

Weld Probes

Product Details:
  • Type: Weld Probes
  • Used: General Purpose
  • Power Source: Electricity

Weld Probes offer a cost effective method to inspect in-service ferrous welds. The inspection method is a clean, non-hazardous alternative over magnetic particle inspection, which does not require the removal of coatings such as paint or oxidation. Weld probes offer sensitivity to flaws in varying orientations and may also be used as a general purpose surface probe on any ferrous material.

Sliding Probes

Product Details:
  • Material: PVC
  • Type: Sliding
  • Use: Laboratory

Sliding probes are specifically designed to inspect rows of fasteners. They operate in reflection mode (driver/pickup coils) and are used to find surface and near-surface flaws.

Sliding probes are available in two different types:

  • Adjustable Types : Iinclude shims that allow the probe to be adjusted to accommodate different fastener sizes and include Microdot connectors
  • Fixed Types : Capable of finding the same flaws as the adjustable but are usually procedure specific due to coil size and frequency range

The fixed versions typically include the Fischer/LEMO Triax connector and their underside is relieved to enable the probe to easily slide over raised fastener heads.

Omni Scan MX ECA/ECT

Product Details:
  • Display: 8.4 Inch
  • Connecting: USB Mouse
  • Type: Omni Scan

With thousands of units being used throughout the world, the OmniScan® MX is a field-proven, reliable instrument that is built to withstand harsh and demanding inspection conditions. Compact and lightweight, its two Li-ion batteries provide up to 6 hours of manual or semi-automated inspection time.

The highly legible 8.4 in. (213 mm) real-time color display of the OmniScan MX enables you to see defects and details under any light conditions. Navigate your way through the instrument’s simple and intuitive interface using the scroll knob and function keys, or by connecting a USB mouse to facilitate the inspection analysis.

Doubler Edge Skin Crack Inspection Solution

Product Details:
  • Type: Doubler Edge
  • Use: Laboratory
  • Design: Skin Crack

Olympus NDT is pleased to introduce the new Doubler Edge Skin Crack Inspection solution, which utilizes the latest ECA technologies for subsurface detection. Drastically reduced inspection times, C-scan imagery, large probe coverage, encoded scan, and data/setup recording capabilities are just a few of the many benefits of OmniScan technology. Intuitive imagery with the C-scan allows for higher probability of detection and better reproducibility, and also makes it easier to identify the rivet row and edge on-screen. Thanks to its wide coverage, probe positioning is not critical. This coverage also enables both edges of the doubler to be covered during the same scan.In comparison with the conventional method of performing this type of inspection, this solution is a major step forward in terms of reduced inspection time

Bond Testing Software

Product Details:
  • VGA Display: 5.7-Inch
  • Battery: Up to 9 hours
  • Display Mode: Full-Screen Option

The BondMaster® 600 delivers a powerful combination of multiple mode bond testing software and highly advanced digital electronics, providing consistently crisp and high-quality signals. Whether you are inspecting honeycomb composite, metal-to-metal bonds, or laminate composite, the BondMaster 600 offers exceptional ease-of-use thanks to its direct-access keys and streamlined interface that features convenient presets for common applications. The enhanced user interface and simplified workflow of the BondMaster 600 offers archiving and reporting that are accessible to any level of user.The resolution and brightness of the 5.7-inch VGA screen on the BondMaster 600 handheld bond tester becomes even more apparent when switched into full-screen mode. Activated by the simple touch of a key, the full-screen mode is always accessible regardless of the display mode or inspection method you are using. The BondMaster 600 bond tester is programmed for a range of standard inspection methods, including pitch-catch RF, pitch-catch impulse, pitch-catch swept, resonance, as well as a notably improved mechanical impedance analysis (MIA) method

Key Features

  • Designed to meet the requirements of IP66.
  • Compatible with existing BondMaster probes (PowerLink) and probes from other manufacturers.
  • Intuitive interface with application-specific presets.
  • Instant display mode toggle using the RUN key.
  • New SCAN view (profile).
  • New SPECTRUM view and Frequency Tracking feature.
  • Direct-access key gain adjustment.
  • All-Settings configuration page screen.
  • Up to two real-time readings.
  • Storage capacity of up to 500 files (program and data).
  • On-board file preview.

 

Bond Testing Improvements

  • C-scan imagery.
  • Can drive up to eight different frequencies at the same time.
  • Dimensioning capabilities.
  • Improved POD.
  • Phase/Amplitude display mode

 

Important to Note

  • Detection similar to that of the BondMaster® 1000e instrument, since the same probes are used.
  • Designed to support pitch-catch probes.
  • Two-axis encoding scanner is required to produce the C-scan

 

The 35RDC is a simple Go/No-Go ultrasonic gage designed to detect subsurface defects caused by impact damage on aircraft composite structures. Features a backlit LCD that displays the word GOOD if no subsurface damage is found or the word BAD when it detects subsurface damage.

Process Pipe Stress Corrosion Cracking Inspection

Product Details:
  • Coil Type: 32 Coil
  • Efficient Inspection: Magnetic And Non-Magnetic Alloys
  • Display: Digital Display

As a part of its eddy current array solutions, Olympus proposes an innovative pipe inspection kit for stress corrosion cracking detection.Though the results are comparable, ECA technology is much less time-consuming and labor-intensive than penetrant or magnetic-particle inspection. With ECA inspection, you can eliminate costly and complicated procedures, such as paint and coating removal.The new versitile ECA probe with interchangeable wedges fits a wide-range of pipe sizes.With the new continuous mode, scan imagery is revealed in real time with a constant results stream.

Key features:

  • Indications are detected in all directions with only a single pass.
  • No need to remove paint; fewer steps means time-savings.
  • Defect depth evaluation capability.
  • Continuous mode provides interrruption-free scan imagery.
  • Imagery and archiving enabled.
  • Adjustable sensitivity and post-process analysis.
  • Green method ( no chemicals involved)

---------------------x--------------------------------x---------------------------x-----------------------

 

3) ECA Subsurface Crack Detection

 

Commercial and military aircraft are built by joining overlapping aluminum sheets together with thousands of fasteners. Fatigue cracks on the underlying layers of aluminum are often concealed by the first sheet layer. To guarantee the integrity of any airplane, these hidden flaws must be detected and repaired during regular in-service inspections.

As a part of its series of aerospace solutions, Olympus proposes an innovative fastener and subsurface crack inspection technique, which propels eddy current technology into previously uncharted territory. This new technology provides an incredibly clear image of cracks under the first layer of aluminum aircraft skin, providing efficient and reliable results

ECA Surface Crack Detection

Product Details:
  • Inspection Time: Up to 15
  • Type: ECA Surface
  • Use: Industry, Laboratory

Olympus propels eddy current technology into uncharted territory in the aerospace industry, with an innovative surface crack detection solution for lap-splice inspection. The structure of an aircraft contains thousands of fasteners, so ensuring their integrity can be an arduous process. Conventional inspection techniques are typically very time consuming and the probability of detection is highly dependant on operator skill. Nevertheless, for over a decade the technology has remained relatively stagnant ... until now.Using eddy current array considerably reduces the duration of an inspection, and detection probability is increased. This solution not only saves man-hours, but its streamlined inspection process helps minimize the possibility for error.

Key Features

  • Time-savings: up to ten times faster than EC pencil probe inspection, and up to 15 times faster than PT inspection.
  • Avoids paint removal; faster and more streamlined process.
  • Probe positioning not as critical as pencil probes or sliding probes.
  • Omnidirectional detection.
  • Great reproducibility.
  • Already integrated into Boeing inspection procedures (757 Part 6 53-30-12).
  • Intuitive and easy-to-read imagery.
  • Data recording for professional reports.
  • Replaces magneto-optical imaging (MOI)

ECA Subsurface Corrosion Detection

Product Details:
  • Thicknesses: 2.5 mm
  • Coil: 32 Coil
  • Type: ECA Subsurface

Aircraft around the globe are repeatedly subjected to drastic temperature changes, which cause condensation and humidity to collect on the inside of the aluminum skin. This humid environment between layers leads to hidden corrosion that must be detected and repaired during regular in-service inspections.As a part of its series of aerospace solutions, Olympus proposes an innovative fastener and subsurface corrosion inspection technique, which propels eddy current technology into previously uncharted territory. This new technology detects, sizes, and evaluates the depth of corrosion between the aluminum layers of commercial and military aircraft, providing efficient and reliable results.

Key Features:

  • Replaces magneto-optical imaging (MOI).
  • No need to remove paint; fewer steps means time-savings.
  • Detection similar to conventional eddy current, plus, with ECA the area of corrosion can be sized; and, the depth of corrosion can be evaluated.
  • With continuous mode, the scan imagery reveals inspection results without interruption.
  • Data recording for professional reports.
Looking for NDT Testing Instruments ?
Share Us:
© Technosys Systems
Desktop Site Back to top